ANR1344I Volumevolume name cannot be reused, remove from server storage.
Explanation: Avolume that was full and is now empty cannot be reused by the
server due to the WORM (WriteOnce - Read Many) characteristics of the media.
SystemAction: The volume will have a state where the access mode is
READONLY,the status is FULL and the percent utilized is 0.0. The volume is
considered empty for storage pool occupancy and utilization fields.
User Response: Ifthe volume is in a library, it must first be removed using the
CHECKOUT LIBVOLUME command prior to manually deleting the volume. Use
the DELETE VOLUME command to remove the volume from server storage.
ANR1360I Output volume volume name opened (sequence number sequence number).
Explanation: During a sequential data operation, the volume specified has been
opened for output as the volume number shown.
SystemAction: None.
User Response: None.
ANR1361I Output volume volume name closed.
Explanation: During a sequential data operation, the volume specified has been
closed because the export or dump is complete.
SystemAction: None.
User Response: None.
ANR1362I Output volume volume name closed (full).
Explanation: During a sequential data operation, the volume specified has been
closed because the volume is full.
SystemAction: None.
User Response: None.
ANR1363I Input volume volume name opened (sequence number sequence number).
Explanation: Because of a sequential data operation, the volume specified has
been opened for input as the volume number shown.
SystemAction: None.
User Response: None.
214
Version 3 Release 7