User Response: The administrator may query the status of the database backup
process by using the QUERYPROCESS command, or cancel the process with the
CANCEL PROCESS command.
ANR2281I Incremental database backup started as process processID.
Explanation: Abackground process was started to backup the contents of the
database. The incremental database backup process was assigned the process ID
shown.
SystemAction: The database backup process starts and server operation continues.
User Response: The administrator may query the status of the database backup
process by using the QUERYPROCESS command, or cancel the process with the
CANCEL PROCESS command.
ANR2282I Database backup trigger defined and enabled.
Explanation: Adatabase backup trigger has been defined with a DEFINE
DBBACKUPTRIGGER command. The percentage of recovery log utilization
specified with the LOGFULLPCT parameter is used to automatically trigger
database backups.
SystemAction: None.
User Response: None.
ANR2283I Database backup trigger defined, but is disabled.
Explanation: Adatabase backup trigger has been defined, but because the
recovery log mode is currently set to NORMAL, the database backup trigger is
disabled. Database backups can only be triggered when the log mode is set to
ROLLFORWARDwith a SET LOGMODE command.
SystemAction: None.
User Response: Toactivate the database backup trigger, use the SET LOGMODE
ROLLFORWARDcommand.
ANR2284I Database backup trigger updated and enabled.
Explanation: An UPDATEDBBACKUPTRIGGER command has successfully
completed. The updated parameters specified on the command are used to
automatically trigger database backups.
SystemAction: None.
User Response: None.
335
Tivoli Storage Manager Messages
3. Common and Platform
Specfic Messages