Table2. Completion Code Values Common to All Device Classes (continued)

Decimal Hexadecimal Description Recommended Action
209 X'D1' Device microcode failure detected Check the microcode level of the
drive. Call the drives manufacturer
and request latest level.
210 X'D2' The device was reset due to device
power-up, SCSI bus reset, or manual
tape load/eject.
Retry the failing operation.
211 X'D3' The SCSI bus was busy. Ensure the SCSI ids are correctly
assigned to the correct device, and
the device is not being accessed by
another process.
Completion Code Values for Media Changers

The following table shows the completion code values, in decimal

and hexadecimal numbers, for the media changers. It provides a

description for the I/O error message and the recommended action.

After performing the recommended action, retry the failing

operation. If the failing operation is not successful, contact TSM

support.

Table3. Completion Code Values for Media Changers

Decimal Hexadecimal Description Recommended Action
300 X'12C' Cartridge entry/exit error Checkthe entry/exit ports for a
jammed volume.
301 X'12D' Cartridge load failure Check the drive for jammed
volumes. On AIX, display the errpt
to check for hardware errors.
302 X'12E' Cartridge in failed drive Check the drive for jammed
volumes. On AIX, display the errpt
to check for hardware errors.
303 X'12F' Carousel not loaded Ensure the carousel is correctly in
place and the door is shut.
304 X'130' Changer failure On AIX, display the errpt to check
for hardware errors.
1394
Version 3 Release 7