Lucent Technologies 555-233-119 3-457DAT-LINE (Data Line)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-457DAT-LINE (Data Line)
3
Table 3-195. TEST #171 Digital Loop Around Test
Error
Code
Test
Result Description/Recommendation
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
1000 ABORT System resources required to run this test are not available. The port may
be in use on a valid call. Use status data-module to determine when the
port is available for testing.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1005
1007 ABORT Data Channel 3 is not administered. This port is required to run this test.
1. Verify that data channel 3 is not administered with the list data-module
command. Administer data channel 3 with the add data-module
command, and run this test again.
1016 ABORT Data Channel 3 is busy. The port may be in use on a valid call. Use status
data-module to determine when the port is available for testing.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1020 ABORT The test did not run due to an already existing error on this port (Error Type
769).
1. Reseat the circuit pack and look in the Error Log. If Error Type 769 still
occurs on this port, replace the circuit pac k.
2000 ABORT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2. If the test continues to abort, escalate the problem.
2003 ABORT Failed to receive an off-hook from the Data Line.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2004 ABORT Failed to receive an off-hook from the Data Channel.
2005 ABORT The handshake between the data channel and the data line port failed.
1. Look for DATA-C HL e rr ors in the Error Log. If present, refer to DATA-BD
(Data Channel Processor circuit pack) Maintenance documentation.
2. Retry the command at 1-minute intervals a maximum of 5 times.
3. If the test still aborts, replace the circuit pack.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page