DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-25change system-parameters maintenance
2
1. Make a note of the current entries in the Alarm Orig ination and CPE Alarm
fields so you can restore them later.
2. Change the Alarm Origination to OSS Numbers field to neither.
3. Change the CPE Alarm Activation Level field to none.
4. If daily scheduled maintenance must remain idle d uring a maintenance
procedure, set the Start Time field to a time after the session ends. If
daily Scheduled Mainten ance is running and need s to be deactivate d, set
the Stop Time field to one minute after the current time.
5. Press Enter and verify that the screen d isplays the message:
Command successfully completed
NOTE:
For earlier releases of system software, disable Cleared Alarm
Notification and Restart Notification b efore submitting the form.
NOTE:
When finished working on the switch b e sure to return all fields to
their original settings.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
change
system-parameters
maintenance
Examples:
change system-parameters
maintenance
init
inads
craft
cust
rcust
none none