Lucent Technologies 555-233-119 System Tone Test Call

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-53Troubleshooting Features
1
Out-of-Service Time Slots to place the call:
1. Dial the Facility Test Call Feature Access Code (for instance, 197, see
Note), and listen for dial tone.
NOTE:
The Feature Access Code (FAC) is administered on the Feature
Access Codes Form. The 197 FAC code used here is an example.
2. Dial port network number (1), then d ial ** and listen for the following tones :
■Confirmation Tone—Connection is made. Go to Step 3.
■Reorder Tone—No time slots are out-of-service.
3. Repeat from Step 1 to alternate between out-of-servic e time slots on TDM
Bus A and B.
System Tone Test Call
The system tone test call connects the voic e terminal user to a speci fic system
tone. To place the call:
1. Dial the Facility Test Call Feature Access Code (for instance, 197, see
Note), and listen for dial tone.
NOTE:
The Facility Test Call Access Code (FAC) is administered on the
Feature Access Codes Form. The 197 FAC code used here is an
example.
2. Dial port network number (1), then d ial *, followed by the two-d igit tone
identification number l isted in Table 1-5.
NOTE:
For a definition of Call Progress Tones see DEFINITY En terp rise
Communications Server Administration and Feature Description
.
Table 1-5. System Tone Identification Numbers
Number Description
00 Null tone
01 Dial tone
02 Reorder tone
03 Alert tone
04 Busy tone
Continued on next page