DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-151list testcalls
2
Output
The following examples shows the output from the list sys-link command.
Field descriptions
list testcalls
This command generates an Automatic Transmission Measurement System
(ATMS) report. The ATMS allows the voice and data trunk fac ilities to be
measured for satisfactory transmission performance. The perfor mance of the
trunks is evaluated accord ing to measurements produc ed by a series of analog
tests and are compared against user-defined threshold values. The purpose of
the report is to provide measu rement data to help determ ine the quality of trunk
lines. The measurement report contains data o n trunk signal loss, noise, singing
return loss, and echo return loss.
Location Physical location of the port assoc iated with the system link
(cabinet-carrier-slot-c ircuit)
Link
Type/Channel Type of system-link and the proc essor channel number of the link (if
there is one): for TN798, link type is PRI (PRI).
State System link state: up or down
Current Path Status of the current path: none if the link is down ; present if the
current path is valid
Faulted Path Specifies the faulted path status: present if the link has been
faulted at least once, none if the link has never gone down, and
default if the default faulted path is b eing used
Last Fault
Recorded Date and time of the most recent fault
list sys-link Page 1 SPE A
SYSTEM LINKS INFORMATION
Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded
01A0516 PRI up present present 12/30/1996 14:18
press CANCEL to quit -- press NEXT PAGE to continue