DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects

3-46ANL-24-L (24-Port Analog Line)

3
Station Present Test (also called Ringing
Application Test) (#48)
This test applies momentary ringin g voltage to the terminal eq uipment and monitors resulting current flow to d etermine whether terminal equipm ent is connected to the p ort. This test may cause some terminal equip ment to ring briefly during d aily maintenance. If this ringing disturbs the c ustomer or the terminal equipment, you c an disable it via the Tests field on the change station form. However, on some software releases, Tests #6, 7, 161, and 35 are disabled.
5 FAIL This may be an internal software error. The message waiting lamp update
failed. The translation and ringer updates were not performed because of
this failure.
7 FAIL The translation update failed. There may be an internal software error. The
ringer update was not performed because of this failure.
8 FAIL This does not indicate a hardware problem. There may be an internal
software error. The ringer update failed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
PASS The software and the port processor have the same status. User-reported
troubles on this port should be investigated by using other port tests, b y
examining station wiring, or by examining the station.
0NO
BOARD The test could not relate the internal ID to the port (no board). This could be
due to incorrect translations, no board is inserted, an incorrect b oard is
inserted, or an insane board is inserted.
1. Check to ensure the board translations are correct. Use the list config
command and resolve problems.
2. If the board was found to be correctly inserted in step 1, issue the
busyout board command.
3. Issue the reset board command.
4. Issue the release busy board command.
5. Issue the test board long command. This should re-establish the
linkage between the internal ID and the port. If this is not the case,
check to ensure that there is a valid board inserted.
Table 3-19. Test #36 Station Status and Translation Audits and Updates — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page