DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-304status system
2
status system
This command displays the status, mode, and operatio nal attributes of the
SPE(s), TDM and Packet busses, tone-clock circuit p ack(s), and emerg ency
transfer switch of single or all c abinets in the system.
!CAUTION:

The purpose of this command is to provide general infor mation about the

cabinet status. This information may not d isplay correctly whe n the cabinet

is in a transient period. In this c ase, wait for 1 minute and enter the

command again.

Current
Hardware Path Location, maintenance name, and alarm information for each
hardware component making up the current p ath of the link. The
path begins at the Packet Interfac e in the SPE and terminates at the
circuit path terminating the other end of the link.
Faulted
Hardware Path If the link encounters a fault, the system reroutes it (if possib le) over
an alternate route. If this has taken place , the faulted path is
displayed on p age 2 of the report. The location, mainten ance
name, and alarm information for each hard ware component making
up the most recent faulted p ath is shown.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status system
cabinet 1st-cabinet
: PPN
Examples:
status system 1st-cabinet
status system all-cabinets
init
inads
craft
cust
rcust
bcms
browse
none none