DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-891PKT-BUS (Packet Bus)
3
2000 ABORT The test timed-out while waiting for an uplink CCMS response from the
Maintenance/Test Packet Bus port.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, check for problems with the
Maintenance/Test Packet Bus port .
2059 ABORT The Maintenance/Test Packet Bus port has reported a hardware failure.
1. Re-enter the test command.
2077 ABORT The Maintenance/Test Circuit Pack Query located more than one
Maintenance/Test Packet Bus port in the system.
NOTE:
The software should not allow this to occur. This is an Internal system
error. Attempt the following work-around steps.
1. Remove all Maintenance/Test circuit packs from the system.
2. Insert one Maintenance/Test circuit pack (there should not be more than
one in a system).
3. Re-enter the test command.
2100 ABORT Maintenance could not allocate all of the necessary system resources to
perform this test.
2500 ABORT An internal operation failed; the test could not be completed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
XYZZ FAIL The Maintenance/Test Packet Bus port has detected faults on the Packet Bus.
The error code is encoded as follows:
1xxx The Maintenance/Test Packet Bus port has reconfigured the Packet Bus
around the faulty leads. This action occurs only in high or critical reliability
systems, and such a failure code should not appear in an R8csi system.
2xxx The Maintenance/Test Packet Bus port is unable to correct all of the Packet
Bus faults it has detected.This action occurs only in high or critical reliability
systems, and such a failure code should not appear in an R8csi system.
x0xx None of the Packet Bus faults are open faults.
x1xx At least some of the Packet Bus faults are open faults. Look for Error Type
2305 in the Error Log. The Aux Data value indicates the number of open
leads.
Table 3-385. TEST #572 Maintenance/Test Circuit Pack Query Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page