Lucent Technologies 555-233-119 Field descriptions (status conference endpoint), Page 1 - Status Conference Endpoint

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-251status conference
2
Field descriptions (status conference endpoint)
The status conference x endpoint y command spec ifies that the conference is
found. Data relevant for each endp oint displays in 6 pag es. If technicians use the
endpoint-ID all, every specified endpoint displays.
Page 1 - Status Conference Endpoint
Screen 2-10. Page 1 of 6: status conference x endpoint y
Field descriptions
Endpoint Slot number associated with the end point on the conference forms .
Product Product identification num ber obtained from the end point.
Manufacturer/
Country Manufacturer identification number and manufacturer’s c ountry code
obtained from the endp oint.
Terminal Name Blank .
Sum Grp Endpoints belong to this Summer g roup number and the VC Audio
Level (L1) and Level 2 (L2) summer ports for this group. These fields
supply entries for confere nces with over 6 particip ants.
Dial Out #1
Dial Out #2 Blank
Blank
status conference endpoint page 1 of 6
STATUS OF CONFERENCE ___ ENDPOINT: __ Status: ________
Ext: _____ Type: ____ Manufacturer/Country: ____/____ Product: _____
Terminal Name: _______________ Data Mode: _________ MLP Rate: ____
Admin Bandwidth: ____ Rate Adaptation: _
Conf Bandwidth: ____ Lo/Hi Interworking: _
Meet-Me Number: ____________________ Dial Out #1: _______________________
Sum Grp: _ L1: ______ L2: ______ #2: _______________________
Quadrature: ______ ________
ENDPOINT STATES/CAPABILITIES/MODES
In Enh ----Capability---- Rate Bond
Use BAS Chl Aud Vid Mlp Gx Adpt Mode Ts Vs
- - - - - - - - - - -
Help line
enter command: