DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-283status isdn-testcall
2
status isdn-testcall
This command displays the progress of an outgoing ISDN-PRI test call. The
status form displays the tested ISDN-PRI B-channel port number, bit error rate,
number of bits transmitted, block error rate, number of b locks transmitted, start
time, duration specified , duration of test call and reason of termination.
Feature Interactions
If the bit error rate or block error rate is greater than zero, the ISDN-PRI trunk may
be in trouble. The statistical informatio n displayed on the ter minal may deactivate
the ISDN trunk. This is subjective because the ISDN trunk may b e used for data
or voice. If the trunk is used for d ata and the rates are high, the trunk should be
deactivated. If the trunk is used for voice, the trunk may not b e deactivated . Also,
high rates be at risk for some typ e of power hit.
Output
The following example shows the output from the status id sn-testcall 80/1
command.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
isdn-testcall
group
number
group
member
number
print
Administered trunk group numb er
Administered group numb er (trunk
within a trunk group)
Report sent to printer
init
inads
craft
none see below
status isdn-testcall 80/1 Page 1 of 1 SPE A
ISDN TESTCALL STATUS
Bit Number Block Number Duration Reason
Error Of Error Of Start Duration Of Of
Port Rate Bits Rate Blocks Time Specified Test Termination
1B1401 0EE0 4EE7 0EE0 6EE2 25/12:36 120 100 in progress