DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-192ATM-NTWK (ATM Network Error)
3
22 (a) Number changed. This cause is returned to a calling party when the
called party number indicated b y the calling user is no longer
assigned. The new called party number may optionally be includ ed in
the diagnostic field. If a network does not support this capab ility,
cause number 1 “
unassigned
(unallocated) number
” is used.
23 (a) User rejects all calls with calling line identification restriction (CLIR).
This cause is returned by the called party when the call is offered
without calling party number information and the called party requires
this information.
27 (a) Destination out of orde r. This cause indicates that the destination
indicated by the user cannot be reac hed because the interface to the
destination is not functioning correctly. The term “not functioning
correctly” indicates that a signalling message was unable to b e
delivered to the remote user; for example, a physical layer or SAAL
failure at the remote user or user equipment off-line.
28 (a) Invalid number format (address incomplete). This cause indicates that
the called user cannot be reached bec ause the called party number
is not in a valid format or is not complete.
30 (a) Response to STATUS ENQUIRY. This cause is included in the
STATUS message when the reason for generating the STATUS
message was the prior receipt of a STATUS ENQUIRY message.
31 (a) Normal, unspecified. This cause is used to report a normal event only
when no other cause in the normal class applies.
32 (a) DTL transit not-my-node ID
RESOURCE UNAVAILABLE
35 (a) Requested VPCI/VCI not available. This cause indicates that the
requested VPCI/VCI is not available. This can be caused by
mismatched VCI ranges on different ATM switches.
36 (a) VPCI/VCI assignment failure
37 (a) User Cell Rate not available
38 (a) Network out of order. This cause indicates that the network is not
functioning correctly and that the condition is likely to last a relatively
long period of time; for example, immediately re-attempting the call is
not likely to be successful.
41 (a) Temporary failure. This cause indicates that the network is not
functioning correctly and that the condition is not likely to last a long
period of time; for example, the user may wish to try another call
attempt immediately.
Table 3-81. Error Codes and Aux Data values ATM-NTWK — Continued
Cause Code/
Error Type
Aux
Data Cause Codes Description
Continued on next page