DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-243status conference
2
Meet-me
number The Meet-Me Number administered for the Mee t-Me Extension. ( )
Dial Type “in” = d ial-in to join endpoint to c onference.
“out” = d ial-out to join endpoint to c onference.
In Use “y” = the endpoint is in use and is fully-c onnected on all med ia in an
active conference.
“c” = the endpoint is in use and is fully-connected ; however, the
endpoint has changed conference audio or video c apability or
conference rate due to r ate adaptation. This conditi on requires
analysis of this endpoint’s c apabilities and mod e fields to identify
reduced capability.
“e” = the endpoint i s in use but has capabil i ty probl e m s. Th e e ndpoint
lacks one of the required capabilities (Vid, Bhl, MLP) to fully
participate. For MLP cap abilities, see the “T120” field . This condition
requires analysis of this endpoint’s capabilities and mode field to
identify the missing capability.
“f” = the end point is in use but not c onnected to all med ia. The
endpoint dec lared all required c apabilities (c hannel/video/
audio/data) but is not fu lly connected to all c onference media. This
endpoint may be c onnecting, failed to c onnect, or is not a valid vid eo
source. This condition requires analysis of this endpoint’s capabilities
and mode fields to id entify the problem.
“n” = the end point disconnec ted during a c onference or
unsuccessfully attempted to connect to a c onference.
“blank” = the field is blank until the first c all from or to the endpoint.
Chl “y” = the end point has the required number of channels.
“e” = the end point does not d eclare support for the correct number of
channels and cannot p articipate fully in the c onference.
“n” = the end point declares the correct number of c hannels, but not
all join the conference, d ue to a network or endpoint p roblem.
“blank” = Audio add-on endpoints set the Chl field to blank.