DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-8busyout journal-printer
2
Feature Interactions
Maintenance of a partic ular component on a link sometimes inte rferes with the
maintenance of the link itself. For example, maintenanc e can put a link
component in a busy stat e causing link set-up to fail . Frequent attempts at
re-setup of a link may delay the recover y of a faulty component, d ue to the
maintenance test of a comp onent only taking place when the component is idle.
Therefore, disable the attempted re-setup of a link with the busyout command
and the link will remain intact. If the link is alread y down, the busyout c ommand
stops periodic re-setup attempts on the link.
Output
The following example shows the output for the busyout journal-printer
wakeup-log command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout
journal-printer
pms-log
wakeup-
log
Link to pms (in output, port name for
pms link =1)
Link to the wakeup logging facility (in
output, port name = 0)
Examples:
busyout journal-printer pms-log
busyout journal-printer wakeup-log
init
inads
craft
nms
None See below
Port Physical object port ad dress: 0 = wakeup log, 1 = pms log
Maintenance Name The name of the maintenanc e object
Alt. Name Not applicable
Result Test result: Pass, Abort, Fail
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the cod es by test number for eac h MO.
busyout journal-printer wakeup-log SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
0 JRNL-LINK PASS
Command successfully completed