DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-70Troubleshooting Features
1
Field descriptions
The functions of the clear, list, and status comm ands associated with the ISDN
Testcall are summarized in the following list. For more detailed information, refer
to the appropriate sec tions as directed.
■Clear isdn-testcall <grp>/<mbr> enables you to cancel an in-progress
ISDN-PRI test call and allow another test call to start. For details on this
command, refer to the ‘‘clear isdn-testcall’’ command in Chapter 2,
‘‘Maintenance Commands’’.
■List isdn-testcall <grp>/<mbr> enables you to list all the ISDN-PRI trunks
in use for an ISDN-PRI test call in the system. For details on this command ,
refer to the ‘‘list testcalls’’ command in Chapter 2, ‘‘Maintenance
Commands’’.
■Status isdn-testcall <grp>/<mbr no> [minutes] enables you to check on
the progress of an outgoing test call. When an outgoing ISDN-PRI test call
completes in a spec ific port network, another ISDN-PRI trunk from the
same port network is available for testing (regardless of whether the
status information has been disp layed). For details on this command ,
refer to the ‘‘status isdn-testcall’’ command description in Chapte r 2,
‘‘Maintenance Commands’’.
Troubleshooting the Outgoing ISDN-Testcall Command
If the TestCall BCC field appears on the Trunk Group Administration Form, make
sure the TestCall BCC field indicates the correct BCC for the service p rovisioned
on the ISDN-PRI trunk. The TestCall BCC values are defined as follows:
■0—Voice
■1—Digital Communications Protocol Mode 1
■2—Mode 2 Asynchronous
Port Port address: PCSSpp (cabinet-carrier-slot-ci rcuit)
Maintenance Name Name of maintenance objec t
Test Number The actual test that was run.
Test Result Test result: Pass, Fail, Abort
Error Code Numeric code exp laining why the release failed or ab orted. Refer
to the detailed list of the cod es by test number for each MO or see
the ISDN Trunk Maintenance documentation for details.