DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-82AN-LN-PT (Analog Line Port)
3
1392 ABORT This port is currently a TTI port and the test does not execute on it.
1. Verify that the port is a TTI port:
■Enter the display port UUCSSpp command (the display shows
that the port is a TTI port).
■Enter the list configuration command (the display shows a t for
the port).
2. If both commands indicate that the port is a TTI port, the abort is
correct for the test, and no action is necessary.
3. If either command indicates that the port is not a TTI port, escalate the
problem.
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals no more than 5 times.
2. If the test continues to abort, escalate the problem.
FAIL The port’s battery feed chip is unable to sup ply sufficient power to the
terminal equipment. This test result might be marginal, and the terminal
equipment may be operating satisfactorily.
1. Retry the command at 1-minute intervals no more than 5 times.
2. If the test continues to fail, determine whether the customer is
experiencing p roblems on this line. Replace the c ircuit pack only if
the customer is experienc ing problems.
PASS The port’s battery feed chip is able to provid e sufficient power to the
station equipment to detect on-/off-hook, but may not be able to supply
power for touch-tones.
1. If touch-tones are inoperative on this station, replace the circuit pack
because this port is inoperative.
2. Investigate user-reported troubles on this port by running other port
tests, by examining station wiring, or by inspecting the station.
Table 3-32. TEST #35 Battery Feed Test — Continued
Error
Code
Test
Result Description/Recommendation
Continued on next page