DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-35ANL-24-L (24-Port Analog Line)
3
ANL-24-L (24-Port Analog Line)
The 24-Port Analog Line circuit pac k (TN793) provides 24 ports for voic e
terminals and supp orts both on-premises and off-premises analog voice
terminals.
No maintenance of the terminal connec ted to the 24-Port Neon Analog Line
circuit pack is performed, excep t to determine whether or not the terminal is
connected. Failures of the neon messag e waiting lamp power and the common
ringing app lication circuitry are rep orted as part of comm on port circuit pac k
errors. See errors 1281 and 1793 in the “XXX-BD (Common Port Circuit Pack)”
section.
NOTE:
This analog line circuit p ack supports analog data modules. When
assigned, analog d ata modules provide ac cess to the Net Pkt (TN794) data
ports. To activate an analog data mod ule you must assign the por t location
on the data form and c onnect a modem to the port. (The analog data
module may be used for c onnection to a CDR output or other adjun cts as
needed.) These ports are tested the same as all other analog ports on the
circuit pack.

Ringing Caused by Maintenance Testing

Test #48 may cause some terminal equipment to ring briefly during d aily
maintenance. If this ringing is disturbing the c ustomer or the terminal equipment,
it should be disab led in the Tests field of the change station extension form. Be
aware that this action also disabl es Tests #6, 7, 161, and 35.
MO Name (in
Alarm Log) Alarm Level Initial Command to
Run1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for example,
A, B, or C); SS is the address of the slot in the carrier where the circuit pack is located
(for example, 01, 02, ..., etc.); and pp is the 2-digit port numb er (for example, 01).
Full Name of MO
ANL-24-L MIN test port PCSSpp l 24-Port Analog Line
ANL-24-L WRN test port PCSSpp sh 24-Port Analog Line