Lucent Technologies 555-233-119 NPE Connection Audit Test (#50)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-786MAPD-BD (MAPD Interface Circuit Pack TN802)
3
NPE Connection Audit Test (#50)
The system sends a message to the on-b oard microprocessor to u pdate the
network connectivity translation for the SCOTCH-NPE chip on the ci rcuit pack.
Major Alarm Inquiry Test (#142) N X X ND
Minor Alarm Inquiry Test (#143) N X X ND
Slip Alarm Inquiry Test (#144) N X X ND
Misframe Alarm Inquiry Test (#145) N X X ND
Translation Update Test (#146) N X X ND
SAKI Sanity Test (#53) Y X D
1. N = No; this test either passes or ABORTS with Error Code 2000 (problem with NT)
2. D = Destructive; ND = Nondestruc tive
Table 3-329. TEST #50 NPE Connection Audit Test
Error
Code
Test
Result Description/ Recommendation
None
2100 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1019 ABORT The test aborted because a test was already running on the port.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page
Table 3-328. System Technician-Demanded Tests — Continued
Order of Investigation
Apply to
TN802?1
Short
Test
Sequence
Long Test
Sequence
Reset
Board
Sequence D/ND2
Continued on next page