Lucent Technologies 555-233-119 ATM-SGRP (ATM Signaling Group)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-209ATM-SGRP (ATM Signaling Group)
3
ATM-SGRP (ATM Signaling Group)
This Maintenance Object (ATM-SGRP) applies when there are administered ATM
signaling group s on the ATM circuit pack.
Table 3-86 outlines the differences between ATM interface circuit p acks:
The TN2305 and TN2306 ATM Interface circuit boards are referred to as TN230X
for the remainder of this MO.
An ATM Signaling Group is a collection of B-c hannels for which a given ISDN-PRI
Signaling Channel Port (ATM D-channel) carries signaling information. ATM
B-channels (ATM-BCH) carry voice or data and are assigned to ISDN trunks. For
more information see ‘‘ATM-TRK (Circuit Emulation Service Circuit Pack)’’.
The operation of the entire ATM signaling group d epends on several other
entities:
■the ATM-DCH signaling channel port
■the TN230X Interface circuit pac k on which the D-channels reside
■the system link that is carried over the p acket bus to the p rocessor
MO Name (in
Alarm Log) Alarm Level
Initial Command to
Run1
1. grp# is the signaling group number (1-166); the test sequence can be either short or long.
Full Name of MO
ATM- SGRP MINOR test s ig-group
grp# ATM-CES Signaling Group
ATM- SGRP WAR NING test s ig-group grp# ATM-CES Signaling Group
Table 3-86. R7 ATM-SGR circuit packs
Circuit
pack Channel types Interface Fiber
Echo
cancellation
TN2305 B and D channels 24 or 32 channel Multimode Y
TN2306 B and D channels 24 or 32 channel Single mode Y
Continued on next page