DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-114list ip-route
2
list ip-route
This command displays a list of the IP routes from DEFINITY ECS out to the LAN.
You may enter the “board” parameter and specify which C-LAN c ircuit pack for
which to show the IP routes (for example, list ip-route board UUCss).
Output
The following example shows the output from the list ip-route c ommand.
Field descriptions
Object The qualifier, or second p hrase of the command, spec ifying the
particular thing b eing acted upon b y the command. Twelve charac ters
is enough to uniquely id entify each object.
NOTE:
Where the object is multiple words i n length, only the first word
will be displayed in the object field. All succeeding w ords wi ll be
treated as qualifiers. This field is trunc ated after twelve
characters to allow enough s pace for qualifiers.
Qualifier One or more qualifiers desc ribing the characte ristics of the
action/object p air. This field is truncated after 31 c haracters to keep
information for a command on a sing le line.
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list ip-route
board UUCss
Board Location
Example:
list ip-route board 01A03
init
inads
craft
none none
Route Number IP-route number
list ip-route
IP ROUTING
Route Destination C-LAN Route Accepted
Number Node Gateway Port Metric Type by C-LAN
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx