Lucent Technologies 555-233-119 TDM Looparound Test (#1285)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-932PPP-PT (Control LAN Packet/Port)
3
TDM Looparound Test (#1285)
NOTE:
This test is destructive.
This test verifies whether the CLAN PPP port can send and receive d ata on the
TDM bus. This test has a tone generator send tones on a timeslo t, and it has a
tone receiver receive tones on another timeslot. The tones are looped through the
ppp port.
Test failure indicates failure of the
■CLAN (TN799) circuit pack
■TDM Bus
■Tone generator / tone receiver circuit pac k
If the received tones: Then:
Match the tones sent The test passes
Do not match the tones sent The test fails
Table 3-401. TEST #1285 TDM Looparound Test
Error
Code
Test
Result Description/ Recommendation
1000 ABORT The port is in use.
1. Determine port status (status clan-port UUCSSpp).
2. Retry the command when the port is idle. The port may be forced to the
idle state by exec uting a busyout port UUCSS command.
3. Escalate if the problem persists.
NOTE:
The busyout port command is destructive, causing all calls and links
associated with the port to be torn down.
1002 ABORT No TDM bus timeslots availab le for the test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. Escalate if the problem persists.
1003 ABORT No more tone receivers idle for use in this test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. Escalate if the problem persists.
Continued on next page