DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-189release port
2
release port
This command deactiv ates specified p orts on circuit p acks.
Output
The following example shows the output from th e release port 1c0701 command
and assumes that the port in cabinet 1, carrier c, slot 7, circuit 1 is an analog
port.
Field descriptions
Result Success status of a busied out object (PASS, ABORT, FAIL)
Error Code System-generated descri ption of a command fail ure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release port
location
Physical location of the port: PCSS init
inads
craft
none none
Port Port address (cabinet-c arrier-slot-circuit)
Maintenance Name The typ e of maintenance objec t that is being released .
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group numb er
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line grou p
number)
Result Success status of a busied out object (PASS, ABORT, FAIL)
Error Code System-generated descri ption of a command fail ure.
release port 01C0701
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 ANL-LINE PASS
Command successfully completed