DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-297BRI-SET, ASAI-ADJ, BRI-DAT
3
l. Certain ASAI protocol-specific cause codes are logged by switc h
software. The cause code can b e determined from the following formula:
If the error type is greater than 3712, then the ASAI cause c ode is equal to
the error type minus 3712. This code was sent to the a djunct by the
switch.
If the error type is less than 3712, then the ASAI cause cod e is equal to the
error type minus 3584. This code was sent to the swit ch by the adjunc t.
A description of the various ASAI cause values is contained in the Table
10-64. This table also contains recommend ed system technician ac tions
associated with the cause value. Further information can also be found in
the Lucent ASAI Specification (288-500-03). In addition, the Aux Data field
of the Error Log entry contains add itional diagnostic inf ormation.
Table 3-130. AS AI Cause Values
Code Explanation Recommendation
Service or Option
Not Available
0 Unrecognized
ASAIProtocol
Operation
Requested ASAI protocol operation is not
implemented by the switch or adjunct. Aux Data
field of Error Log entry contains protocol identifier
for unrecognized operation.
1. Consult switch an d adjunct do cumentation to
determine which set of operations is supported
by the switch and the adjunct. Adjunct
administration turning off operations not
implemented by the switch may resolve the
problem.
40 Resources not
available No available internal resources to service switch or
adjunct request. System transaction capacity for
adjunct or switc h is exceeded.
1. Re-engineering of adjunct services my be
required.
Continued on next page