DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-318test alarms
2
Field descriptions (Hardware Test Alarm Query)
Alarm Types The type of alarm to be tested: put y or n in the field (s) to selects one
or a combination of alarms.
Interval Tests alarms for the last hour (h), last day (d), last week (w) or all (a)
[default].
From Test alarm from the specified time sp ecified (
mm
/
dd
/
hh
/
mm
). If no
from date is entered, then no c hecking is done and the alarms active
since a month prior to the c urrent time are reported.
To Test alarms associated with record s to the specified time sp ecified
(
mm
/
dd
/
hh
/
mm
). If no to date is entered, any alarm ac tive after the
from date is selected.
Equipment
Type The technician can ch oose from five different equipment typ es. If
there is no input to any of these fields, the system defaults to all the
equipment. The user can selec t one of the following fields:
■Cabinet: tests alarms associated with a p articular cabinet (1-3).
■Port Network: tests all alarms associated with a p articular port
network (1-3).
■Board Number: tests all alarms associated with a particular
circuit pack (PCSS, default cabinet = 1).
■Port: tests all alarms associated with a particular port on a
circuit pack (PCSSpp, default cabinet = 1).
■Category: Alarms for a particular equipment category
■Extension: Alarms associated with an extensio n number
■Trunk (group/member): tests all alar ms associated with a
particular trunk g roup or trunk group member,
XX
/
YY
, where the
group identifier tests all alar ms associated with a trunk group
(
XX
/__), and the group identifier
and
member identifier are both
entered to test all alarms associated with a specific trunk g roup
member (
XX
/
YY
).