DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-107ATM Tips
1
If you are administering the A500 throug h a telnet connection over
the Ethernet, this works, but it is worthwhile making sure the
Ethernet address is correct anyway.
b. If the customer is providing an Ethernet connection to the A500,
does the Ethernet IP mask field have the customer-provided
mask (typically something like 255.255.255.0, although other
values are valid), as config ured with the admin address
command?
c. If the customer is providing an Ethernet connection to the A500,
does the IP default router field have the customer-provided
Internet address, as config ured using the admin gateway
command?
d. If the customer is providing an Ethernet connection to the A500 and
intends to upload to or d ownload from a TFTP server, does the
TFTP server field have the customer-provid ed Internet add ress,
as configured using the tftp setserver command?
e. Does the ATM address field have the customer- or
Lucent-provided network prefix (the first thirteen bytes an d set by
using the modify atmprefix command)?
DEFINITY Administration
Is ATM PNC administered correctly?
1. Enter list atm pnc on the DEFI NITY SAT. The cab inet , ca rrier and slot
positions of each admin istered TN230X board display as shown in Figure
1-33. Ensure that each board’s phys ical location matches the display.
Figure 1-33. Screen output for list atm pnc command
Alternatively, use the list configuration UUC command (non-control
cabinets) to confir m the PPN and EPN board locations and correc t
insertion.
list atm pnc Page 1 SPE A
ATM PNC
PNC A-PNC B-PNC
Connection # LOC LOC
1 01B02
2 02A01