Lucent Technologies 555-233-119 B-side ATM-EI Critical Reliability, Changing ATM address of a Standby ATM-PNC EI Critical Reliability

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-147ATM-EI (Expansion Interface Circuit Pack)
3
2. Add an ATM PNC connection (see ‘‘Adding ATM PNC connections’’
above).
B-side ATM-EI — Critical Reliability
1. Enter status pnc and ensure that the A-PNC is active.
If it is not active, request a pnc interchange using the reset pnc
interchange command.
2. Enter busyout pnc-standby.
3. Enter list config car and verify that an ATM circuit pack is administered
for the new location. If it is not, add the ATM circuit pack translations.
4. Enter busyout atm pnc
n (connection number) b-pnc.
5. Enter change atm pnc
n (connection number) and change circ uit pack
location for the B side.
6. Enter release pnc-standby.
Changing ATM address of a Standby ATM-PNC EI — Critical
Reliability
1. Enter busy pnc-standby.
2. Enter change atm pnc
n (connection number) and change the ATM
address for the standby side.
3. Enter release pnc-standby.