DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-229status bri-port
2
Layer 1 State: BRI Layer 1 (physical) state on the port. Valid states are
“activated,” “pend-ac tivation,” and “d eactivated.”
■“activated” state = layer 1 frames are passing between the
port and BRI endpoints.
■“pend-ac tivation” state = the p ort is in-service, the layer 1
interface device is on, layer 1 frames are sending to the BRI
endpoints connec ted to this port, b ut BRI endpoints are not
responding.
■“deactivated ” state = the layer 1 interfac e device on the BRI
is off, because the port g oes out-of-service.
TEI Value Layer 2 addressing p arameter used by the switc h to exchange
information over point-to-point sig naling links between BRI
endpoints. Each poin t-to-point signaling link h as an associated
TEI. This field displays the addressing parameter value. (0–127)
Layer2 State: Point-to-point signaling link lay er 2 state. Valid states are
“un-assigned,” “assigned,” “established ,” “l3-established ” or
“hyperactive.”
■“un-assigned” = the link is in TEI-UNASSIGN state at Layer 2.
■“assigned” state = the link is in the AWAIT_EST (Await
Establish) state at layer 2. (If BRI endpoints supp ort TEI
allocation proced ures, they successfully exec ute and a TEI is
assigned to the endp oint by the switch.
■“established” = the link is in the MF_EST_NORM (Multi-Frame
Established Normal) state at layer 2. The switch su ccessfully
initiates the link can now exchang e layer 3 frames with the
endpoint. If the endp oint does not suppor t SPID initialization
procedures, the endp oint extension associated with the link
also displays. This is the normal state for the lin k in the
point-to-point wiring c onfiguration.
■“l3-established” = link is in the MF_EST_NORM state at layer
2 and SPID initialization procedures suc cessfully complete.
The endpoint extension associated with the link also displays.
This is the normal state for the link in the multi-point wiring
configuration.
■“hyperactive” = traffic on this link g oes over threshold. The
link suspends and is deemed hyperac tive.
Endpt Extension Voice/data endpoint exte nsion associated with the link if the link
is in the “established” (point-to-point c onfiguration) or
“l3-established” (multipoint config uration) layer 2 state.
Otherwise, this field is blank.