DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-232status bri-port

2
BRI, ASAI 64-126 L3-Established blank yes Technicians conduct SPID
facilitation tests on the port. Links
are not associated with BRI port
endpoints. See description of SPID
Facility Test Procedures in the
‘‘BRI-SET, ASAI-ADJ, BRI-DAT’’
maintenance documentation.
BRI 64-126 L3-Established ext yes Technicians conduct SPID
facilitation tests on the port. Links
are associated with port endpoints.
See de s c r iption o f SPID Facil i ty Tes t
Procedures in the ‘‘BRI-SET,
ASAI-ADJ, BRI-DAT’’
maintenance documentation.
BRI 0-126 L3-Established blank blank Invalid SPID assigned to link.
1. Change the SPID value in the
BRI endpoint to match the SPID
administered to the BRI
endpoint on the port. Verify the
repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of
the BRI endpoint is
L3-Established.
Table 2-3. Status BRI-Port Command Interpretation — Continued
Endpoint
Type s
TEI
Range Layer 2 State
Voic e
Extension
Service
SPID Description / Recommendation
Continued on next page