DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-301status synchronization
2
status synchronization
This command displays the location of the DS1 or tone-clock c ircuit pack that is
used for an on-line synchronization referenc e. The synchronization subsystem
provides error free digital communication between the switch and other PBXs,
COs, or customer premise equi pment. The subsystem is made up of: TDM bus
clock, DS1 trunk board, maintenanc e and administration software resid ent in the
SPE.
Work Mode Work mode of each hunt group th at an agent is logged into
Service State In service/on-hook, in service/off-hook, i n-service/in-tsa (Terminal
Self Administration), out of service, or d isconnected.
Maintenance
Busy State Whether maintenance is testing the objec t (yes or no)
SAC Activated Whether send all calls is activated (yes or no)
User Cntrl
Restr One or two of the following: none, total, stat-stat, outward
or terminate.
Group Cntrl
Restr One or two of the following: none, total, stat-stat, outward
or terminate.
AWU Call at Time that Automatic Wakeup Call is sched uled
User DND Status of the do not disturb feature.
Group DND Status of the group do not dis turb feature.
Room Status Whether a room is occupied or not (non-guest room, vacant, or
occupied).
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
synchronization
print
Report sent to printer
Examples:
status synchronization
status synchronization print
init
inads
craft
cust
browse
none none