DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-245status conference
2
Rate Adpt Rate adaptation/Interworking ind icator (5, 6, y, c, e, n, blank). 5 and
“6” app ly to Low Speed/High Speed Interworkin g. All other values
apply to Rate Adaptation.
“5” = 56-kb ps (Low Speed) endp oint joins a High Speed (128 kb ps or
above) conference. This endp oint connects with audi o only capability
but is not a valid vid eo source and destinati on.
“6” = 64-kb ps (Low Speed) endp oint joins a High Speed (128 kb ps or
above) conference. This endp oint connects with audi o only capability
but is not a valid vid eo source and destinati on.
“y” = Endp oint joins the conference at 64 kb ps, but bec ause rate
adaptation to 56 kbp s is triggered b y another endpoint, this end point
rate adapts to 56 kbp s.
“c “ = The administered conference bandwidth is 64 kb ps. This
endpoint joins the conferenc e at 56 kbps. The first 56 kbp s endpoint
that joins 64 kbps rate adap table conferences trig gers rate adaptati on
(see Join Time below).
“n” = Another endpoint trigger s a 64-kbps conferenc e to rate adapt to
56 kbps. This endpoint joi ns the conference at 64 kbp s, but
encounters problems in rate adapting to 56 kb ps. This endpoint may
have audio and may b e receiving video, b ut is not a valid video
source.
“blank” Rate adap tation was not triggered by any endpoint. If this
endpoint is in use and connected, it joins the c onference at the
administered band width.
Bond Mode BONDing Mode = b lank for calls that are unrelated to bonding.
Ts “t” = The endp oint detects voic e energy (talking).
“m” = The endp oint indicates to the MCU that it is muted . It is possible
for an endpoint to mute, bu t not send any indication to the MCU. I n
this situation the MCU does not disp lay a mute indication.
“M” = UDD/CRCS Agent interfac e mutes the endpoint’s audio. Both
the endpoint and the UCC/CRCS Agent must mute the end point
audio.
“S” = The solo-audio state set b y UCC/CRCS Agents mutes the
endpoint’s audio. While in solo -audio state, new endpoints that join
the conference automatic ally mute.
“blank” = Voice energy (talking) is not d etected from the end point.