DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-1259VC-BD
3
c. Transient communication problems exist b etween the switch and this
circuit pack. Execute the test board PCSS command and refer to the
repair procedures for the Control Channel Loop Around Test (#52).
d. The circuit pack detected an on-board hardware failure. The reported aux
data values correspond to the following detec ted errors:
Reset the circuit pack b y executing the busyout board PCSS, reset
board PCSS, and release board PCSS command s. When it is reset, the
circuit pack ex ecutes a set of tests to detect the p resence of any of the
above faults. The detection of one these errors d uring initialization causes
the circuit pack to lock-up and ap pear insane to the system. See the repair
procedures in footnote (a) for error typ e 1.
e. The circuit pack detec ts a program logic error. While no action is required,
this error may lead to errors of other types b eing reported ag ainst this
circuit pack.
f. The circuit pack cannot up date NPE memory and read it bac k. This error
type can be ig nored, but it may lead to other er ror types being repor ted
against this circuit p ack.
g. A critical hardware failure has b een detected on the c ircuit pack. Use
busyout board PCSS, reset board PCSS, followed by release board
PCSS. If test #53 passes, the on-board circuitry is healthy. Use test board
PCSS long clear to retire the alarm. If test #53 fails, replace the circ uit
pack.
h. The circuit pack detec ted a critical hard ware failure. Reset the circuit pack
by issuing the busyout board PCSS, reset board PCSS, and release
board PCSS commands. If the Circuit Pack Restart Test (#594) passes,
then the on-board circu itry is healthy. Retire the alarm by issuing the test
board PCSS long clear command. If the Circuit Pack Restart Rest (#594)
fails, replace the circu it pack.
The reported error types corresp ond to the following dete cted errors:
Error Description
4352 External RAM error
4353 Internal RAM error
4355 ROM Checksum error
4357 Instruction set error
Error Description
1293 On-board auxiliary p rocessor insane
1294 Internal memory access error