DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-108ATM Tips
1
2. Enter status pnc at the DEFINITY SAT. This display tells you which
TN230X board is active in a duplicated system and how many alarms (if
any) of each severity level have been log ged for the board . Figure 1-34
shows the output from this command .
Figure 1-34. Screen output for status pnc command
3. Enter either list configuration UUC (for the carrier in which the ATM-EI
packs reside) or display circuit-packs
cabinet
(non-control cabinet) at
the DEFINITY SAT. This command tells you in more detail what boards are
in which slots in each c abinet and carrier. Verify that the TN230Xs are
physically located in the slots indicated on the d isplay. Figure 1-35 shows
the output for the display circuit-packs 1 command ; Figure 1-36 shows
the output for the display circuit-packs 2 command .
status pnc
PORT NETWORK CONNECTIVITY
Duplicated? no
Software Locked?
Standby Busied?
Standby Refreshed?
Interchange Disabled?
A-PNC B-PNC
Mode: active Mode:
State of Health: State of Health:
Inter PN Index: Inter PN Index:
Major Alarms: 0 Major Alarms:
Minor Alarms: 0 Minor Alarms:
Warning Alarms: 0 Warning Alarms: