DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-319CABINET (Cabinet Sensors)
3
Figure 3-15. Fan/Filter Removal
Fan Assembly Removal/Replacement
1. Pull (unplug) the fan assembly from the c hassis using the thumb/fing er
notch provided. The p ower for the fan automatically disconnec ts when the
assembly is unplugg ed.
2. Plug in the new fan assembly. The power for the fan automatically
connects when the fan assemb ly in plugged in.
3. Replace the fan/filter acce ss panel and the left door.
Fan Filter Removal/Replacement
1. Remove the fan access panel from the left s ide of the cabinet.
2. Pull the fan filter from the chassis.
3. Clean (vacuum or wash with water) or replac e the filter as needed and
slide the filter back into the chassis.
4. Replace the fan access p anel.