DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-322test analog-testcall
2
Feature Interactions
■Additional data is avai lable after running a test. See the ‘‘list
measurements ds-1’’ command with the
test-call
option for details on how
to access the add itional data.
■If the trunk is in use by call proc essing, the test aborts.
■If the trunk is in use by maintenance, the test queues and runs when the
current maintenance activity fi nishes.
Output
The following example shows the output for the test analog-testcall trunk 78
command. The responses d isplay on a test-by-test b asis with one line of data for
each test result.
Field descriptions
Port The port address (cab inet-carrier-slot-circ uit) of the maintenance
object that is being tested.
Maintenance
Name The type of maintenance objec t that is being tested .
Alt. Name Alternate way to identify maintenance ob jects.
If the Object is The field contains
trunk
xxx/yyy
(where
xxx
= trunk group num ber
and
yyy
= member number)
Test No. The test being executed
Result Test result: Pass, Fail, Abort, Disabled, No Board, or Extra Board .
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the c odes by test number for each MO.
test analog-testcall trunk 78
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C1505 CO-TRK 78/1 845 PASS
01C1507 CO-TRK 78/2 845 PASS
Command Successfully Completed