DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-76display synchronization
2
display synchronization
This command calls up the s ynchronization form where the administered
synchronization stratum and reference sources are displayed . (No changes can
be made to the system sync hronization with this command.)
Feature Interactions
■A DS1 interface or a UDS1 board that has b een selected as either a
primary or second ary synchronization source c annot be removed on the
DS1 circuit pack ad ministration form or the regular circ uit pack
administration form.
Output
The following example shows the output for the display synchronization
command.
Identification: Depends on the hardware that is physically connec ted to the port:
If hardware is The field contains
station station extension
trunk trunk group and memb er number)
modem pool modem pool group number
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
synchron-
ization
print
schedule
Report sent to printer
Command is validated and then a
scheduling form displays to sc hedule
execution of the command. The
command is then placed in the
command queue and is executed at the
specified time. The information
displayed by the command is sent to the
system printer instead of the screen.1
Examples:
display synchronization
display synchronization print
display synchronization schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
bcms
browse
none See below