DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-26change system-parameters maintenance
2
Output (Page One)
The following output example shows a display of

Page 1

of the change
system-parameters maintenance command.
Field Descriptions (Page One)
Operations Support Parameters
Product
Identification Identifies switch to an Oper ations Support System (OSS): 10-digit
number starting with 1.
First OSS
Telephone
Number
Switch reports alarms first to the First OSS telephone number (for
example, INADS or Trouble Tracker). The number must be ob tained
from the National Customer Support Center (NCSC) or the TSC. (#
and * are not allowed in the telep hone number.)
Abbrev Alarm
Report Enables the Abbreviated Alar m Report feature for the first OSS. (yes)
Second OSS
Telephone
Number
The switch reports alarms second ly to the second OSS telephone
number. For example, INADS or DEFINITY SNMP. The number must
be obtained from the Nationa l Customer Support Center (NCSC) or
the TSC. (# and * are not allowed in the telephone number.)
Abbrev Alarm
Report Enables the Abbreviated A larm Report feature for the second OSS.
(no)
change system-parameters maintenance Page 1 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
Product Identification: 1000000000
First OSS Telephone Number: 5551212 Abbrev Alarm Report? y
Second OSS Telephone Number: 5551213 Abbrev Alarm Report? n
Alarm Origination to OSS Numbers: both
Cleared Alarm Notification? y Suspension Threshold: 5_
Restart Notification? y
Test Remote Access Port? n
CPE Alarm Activation Level: none
Packet Bus Activated? n
Customer Access to INADS Port? n
Repeat Dial Interval (mins): 7
SCHEDULED MAINTENANCE
Start Time: 22: 00 Stop Time: 04: 00
Daily Maintenance: daily Save Translation: daily
Command Time-out (hours): 2
Control Channel Interchange: no System Clocks Interchange: no
SPE Interchange: no EXP-LINK Interchange: no