DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-259status conference
2
Drop Reason
(cont’d)
“Endpoint” = Clearing received from DS1. The endp oint initiates the
disconnect. The endp oint notifies the MCU that it intends to disc onnect.
“Far-end” = Clearing received from DS1. The network or endp oint
initiate the disconnect.
“Handshake” = Framing is never found or is lost for over 40 sec onds
and the endpoint is d isconnected. (the end point could not c omplete
initialization due to probl ems with finding Frame Alignment Signal
(FAS), Multi Frame Alignment (MFA) and corrected coded cap-sets)
“IDtimeout” = The H3.20 user unsuc cessfully (three times) sends M CU
responses regarding the UIN/password Query. Each timeout period is
administered.
“Internal” = MCU has a p roblem allocating the necessary trunk
resources to route dial-out c alls for specified d ial-numbers. This
problem is associated with routing patterns or trunk-ass ociated
translation (for example, TAC spec ified in the dial-out numb er or routing
pattern points to a trunk group witho ut members), or indicates a lack of
trunk resources (for example, all trunk memb ers are maintenance busy
or all in-service members are b usy on a call).
“Network” = Clearing received from DS1. The disconnec ts the
endpoint. The endpoint with the disconnect notific ation capability
disconnects without notifying the MCU.
“Not-MCU” = The dial-out d estination numbers of the “CAS” extens ions
terminate to numbers that are not dial-in c ascade MCU extensions.
“No-ring” = The is up for 30 seconds and no ringing is detec ted.
“Reorder” The MCU CPTR resources detect that no network trunks are
available to place the c all. See “Dial-out” for a desc ription of CPTR
usage.