DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-278status hardware-group
2
Output
The following example shows the output from the status hardware-group
command.
Field descriptions
Hardware Group Command
State: “active” = testing in progress, “ canceled” = testing canc eled,
“complete” = command c ompleted; no testing oc curring.
Number of MOs Tested: Number of MOs in the specifie d group (refer to test
hardware-group command) that the hardware-group command
tests, including MOs that were tested or aborted d ue to resource
contention.
Total Number of MOs to be
Tested: Number of MOs in the group s pecified in the test
hardware-group command.
Percent Complete: Ratio of the completed MOs to the MOs to test i n the command.
Elapsed Test Time: Tracks completion time for the hardware-group command . If a
test cancels and then restar ts, the time for the cancel period is
excluded. (HH:MM:SS)
Repetition Number Number of completed iterations that correspond to the ’rep eat’ or
’continuously’ option.
Percentage of Tests
Passed: Percentage of tests that passed.
Percentage of Tests
Failed: Percentage of tests that failed.
status hardware-group page 1 of 1
HARDWARE GROUP STATUS
Hardware Group Command State: active
Number of MOs Tested: 11070
Total Number of MOs to be Tested: 12300
Percent Complete: 90%
Elapsed Test Time (hr:min:sec): 0:15:30
Repetition Number: 1
Percentage of Tests Passed: 82%
Percentage of Tests Failed: 11%
Percentage of Tests Aborted: 7%
ENTERED HARDWARE GROUP COMMAND
Command: test hardware-group system
Test sequence: short
Test repetition: repeat 3
Output Options: failures
Hardware Options: SPE-interchange