Lucent Technologies 555-233-119 - page 1336

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-774MAPD-BD (MAPD Interface Circuit Pack TN802)
3
If there is no reply:
a. Check that the internal cab les on the TN802 circuit pack (No tes 4
and 6 in Figure 3-32) have not worked loose.
b. Otherwise, replace the c ircuit pack.
3. At the command prompt, typ e ping 10.32.64.97 (the internal IP trunk
server address) and p ress Enter.
If configured cor rectly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply:
a. Check that the internal cab les on the TN802 circuit pack (No tes 4
and 6 in Figure 3-32) have not worked loose.
b. Otherwise, replace the c ircuit pack.
4. At the command prompt, typ e ping 10.32.64.96 (the IP address of the
internal Motorola MPC860 processor) and p ress Enter.
If configured cor rectly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply:
a. Check that the internal cab les on the TN802 circuit pack (No tes 4
and 6 in Figure 3-32) have not worked loose.
b. Otherwise, replace the c ircuit pack.
5. Ping the gateway: at the command prompt, type ping XX.XXX.XXX.X XX
(the IP address of the gateway) and press En ter.
6. When finished, at the command p rompt type exit and press Enter.