DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-366CLSFY-PT (Call Classifier Port)
3
CLSFY-PT (Call Classifier Port)
The TN744D Call Classifier (CLSFY-BD) circuit pack is a service circuit p ack that
enables usage of the Outbound Call Management (OCM) and the Inb ound Call
Management (ICM) features. The TN744D also enables usage of R2-MFC
signaling for incoming and outgoing feature op eration. There are eight ports
(CLSFY-PTs) on the Call Classifier circuit p ack. Each port can hand le call
classification, touch-tone reception, or MFC tone generation and d etection or
touch-tone reception.
The CLSFY-PT maintenance feature defines a set of tests to ensure that the Call
Classifier circuit pac k ports are capab le of detecting tones for c all classification
and detecting and generating neces sary tones for correct MFC feature
operation.
NOTE:
A TN744D Call Classifier/Tone Detector circuit pack may b e required in
systems with heavy traffic. This circuit p ack can be installed into any port,
although slot 1 of Cabinet B is p referred.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run1
1. Where P is the port network number (1 for PPN); C is the carrier designation (A, B, or C); SS is the
address of the slot in the carrier where the circuit pack is located (01, 02, ..., and so forth); and pp
is the 2-digit port number (01, 02, ..., and so forth).
Full Name of MO
CLSFY-PT(a) MAJOR t est po rt PCSSpp sh Call Cl assifi er Port M aintena nce
CLSFY-PT MINOR test p ort PCSSpp sh Call Classifier Port Maintenance
CLSFY-PT WARNING release port PCSSpp Call Classifier Port Maintenance