DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-204save translation
2
inconsistent due to hardware failures that oc cur during the save
announcements command, error messages d isplay indicating corrective
action. Maintenance software that monitors hard ware logs hardware errors
to maintenance. Then, maintenance software invokes test s to diagnose
and attempt correc tive action. If maintenance software fails to correc t the
problem, an alarm raises di splaying corrective ac tion.
■The save announcements command writes two time-stamped, ident ical
copies of announcement d ata to selected devic es. The time-stamp for
both copies is the same. Eac h copy contains a timestamp and the state of
the copy. (good or bad)
■If good copi es of announcement files are not available, the restore
announcements command c annot execute until the save
announcements command comple tes. Announcements on the board are
still usable.
Output
The following example shows the output from the save announcements
command.
Field descriptions
save translation
All translation data is kept in memor y during system operation, and if the switch
goes down, the system loses all d ata. This command allows users to save the
in-memory translation data to the memory c ard. This command runs as par t of
scheduled maintenanc e and/or on demand b y the technician.
Processor Displays processors whe n announcement data writes
to its devic es. ( SPE-A and SPE-B)
Command Completion Status Whether the command succeed ed or aborted.
Error Code 0 = save was successful
1 = unable to save to the ac tive spe device
2 = unable to save to the stand by spe devic e
save announcements Page 1 of 1 SPE A
SAVE ANNOUNCEMENTS
Processor Command Completion Status Error Code
SPE-A Success 0