Lucent Technologies 555-233-119 display memory-configuration

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-72display memory-configuration
2
display memory-configuration
This command indicates the total memory available for the active processor.
Action The level of recovery performed by the system. The recovery levels
follow:
Reset system 1 (Warm)
Reset system 2 (Cold-2)
Reset system 3 (Cold-1)
Reset system 4 (Reboot)
Reset system 5 (Extended Reboot)
Escalated Whether the restart was escalated to a high er level to clear the probl em.
There is a software escalation strategy that c an cause a higher level
restart than the one previously performed to be executed i f the need
arises.
Carrier Indicates the carrier on wh ich the recovery was performed (1A).
Time The date (month and day) and time of the restart.
Action/ Object Qualifier Qua lifier Description Permissions Defaults
Feature
Interactions
display
memory-
configuration
long
short
print
schedule
Option required to display the SPE
Flash ROM and DRAM
configuration.1
Report sent to printer
Command is validated and then a
scheduling form disp lays to
schedule execution of the
command. The command is then
placed in the command q ueue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.2
Examples:
display memory-configuration
display memory-configuration
long
1 The long and short options are the same.
2 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
browse
none none