Lucent Technologies 555-233-119 MET-LINE (MET Line)

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-813MET-LINE (MET Line)
3
MET-LINE (MET Line)
Electronic Station is the user-friendly term to d enote the MET (Multibutton
Electronic Telephone) Station Set. The MET sets were originally introduced for
use in earlier PBX systems but can now be used in Generic 1 switches.
The TN735 MET Line circuit pack supports four o f these METsets. Each MET set
uses three pairs of wires: an analog voic e pair, a transmit pair, and a rec eive pair.
Power is sent over the transmit and receive pairs . The MET Line circuit pack
supports all 10-, 20-, and 30-button sets.
MET Line interactions are shown in Figure 3-34.
Figure 3-34. MET Line Interactions
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run1
1. Where P is the port network number (1); C is the carrier designation (for example, A, B,
or C); SS is the address of the slot in the carrier where the circuit pack is located (for
example, 01, 02, ..., etc.); and pp is the 2-digit por t number (for example, 01).
Full Name of MO
MET-LINE MINOR test p ort PCSSp p l MET Line
MET-LINE WARNING test port PCSSpp sh MET Line
PBX
PORT (1)
VOICE
TERMINAL
PORT
VOICE
(4)
MET LINE
CIRCUIT
PACK
MET
LINE
TERMINAL
MET LINE
MET LINE