DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-710IO-PROCR (I/O Processor)
3
Table 3-299. TEST #703 Demand Reset Test
Error
Code
Test
Result Description/ Recommendation
1362 ABORT The test is not allowed to run because the I/O Processor is in-service. Running
this test is not allowed because it is destructive.
1. Use the display alarms command to determine the service state of the I/O
Processor. If the state is OUT, try the reset command again.
2000 ABORT Response to the test request was not received within the allowable time period.
1. Retry the command at 1-minute intervals, a maximum of 3 times.
Any FAIL The I/O Processor diagnostic tests failed.
1. Retry the command.
2. If the reset fails, replace the Processor circuit pack.
PASS The I/O Processor diagnostic tests passed.
Continued on next page