DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-220ATM-SYNC (ATM Synchronization)
3
ATM-SYNC (ATM Synchronization)
This section discusses intra-swit ch synchronization maintenanc e and the
hardware and software components that provide a common reference freq uency
for reliable digital c ommunication among the G3r syst em, the ATM switch, and
other PBXs, Central Offices (COs) or Customer-Premises Equipment (CPE).
Circuit packs involved in synchronization includ e:
TN768, TN780, or TN2182 Tone/Clock
TN722, TN767, and TN464 DS1 Interfaces (all suffixes)
TN2305/6 ATM Expansion Interface (multimode fiber)
Synchronization is achieved b etween the Processor Port Network (PPN) and the
Expansion Port Networks (EPNs) through the ATM port network connectivity (ATM
PNC) between the networks. Depending on the network synchronization plan
and the status of synchronization sources , the system timing reference may be:
The clock circuit p ack on the ATM switch
A DS1 or UDS1 interface circuit pack-tap ped T1 input signal connected to
the ATM switch clock circuit
An OC-3 interface circui t pack on the ATM switch
Stratum 4 synchronization extracts timing inf ormation directly from
A DS1 or UDS1 reference
An OC3 referenc e
The ATM switch clock
For further information about synchronization inc luding network sync hronization,
see

AT&T Network and Data Connectivity

.

Stratum 4 Synchronization

Systems may have primary and sec ondary synchronization references
(DS1/UDS1 interface circuit pac ks or ATM-Switch) when using Stratum 4
synchronization.
If the primary synchronization reference in Figure 3-10 is provid ing a valid timing
signal, then the flow of system synchronization wo uld travel from the DS1
interface circuit p ack in the EPN to the ATM switch. The primary DS1 interface
circuit pack p rovides a timing sig nal for the ATM switch clock circuitr y.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run Full Name of MO
ATM-SYNC MINOR display errors ATM Synchronization
ATM-SYNC WARNING test synchronization ATM Synchronization