DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-174netstat ip-route
2
Field descriptions
netstat ip-route
This command displays th e routing tables that are resident in the C-LAN c ircuit
pack. With the “board ” option, the command netstat ip-route board UUCss
displays the routing tab les that are resident on the speci fied C-LAN circuit p ack.
Output
The following example shows the output from the netstat ip-route c ommand.
Trunk
Group/Member Trunk group and group member number. (1-99/1-99).
Port The port location (cabine t-carrier-slot-circuit) for tr unks.
Signaling Group
ID If the trunk is ISDN, this field contains the number of the ISDN
Signaling Group. Otherwise, this field is blank. ( )
Connected Ports Port locations (cabinet-ca rrier-slot-circuit) connec ted to the trunk.
Service State In-service/active, in-servic e/idle, out-of-service, out-of-servic e-NE
(Near End), out-of-service-FE (Far End), maint-NE/active,
maint-FE/active, maint-NE/idle, maint-FE/idle, pending-in-ser vice,
pending-maint, or disconnected. NE (Near End) and FE (Far End)
refer to the “end” of the trunk that has placed the fa cility in its current
state.
Maintenance
Busy This field identifies maintenance tes ting that occurs on the trun k.
CA-TSC State The state of temporary signaling c onnections. (connec tion set up to
pass call information over PRI signaling links).
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
netstat ip-route
board
UUCss
Exampl e:
netstat ip-route board 01A03 init
inads
craft
none none
netstat ip-route page 1 of xxx
IP ROUTING - C-LAN
Destination Gateway C-LAN Bd/Pt Interface
1:___.___.___.___ ___.___.___.___ 01C0514 ppp13
2:___.___.___.___ ___.___.___.___ 01C0517 cmp0
3:___.___.___.___ ___.___.___.___ 01C0518 lo03