DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands

2-176ping

2

The ping command has 4 qual ifi ers:

■‘‘ping ip-address’’
■‘‘ping node-name’’
■‘‘ping board’’
■‘‘ping packet-length’’
ping ip-address

This c omman d “ping s” the given IP address of the d estination to ping. The

command returns

■the port used to per form the test
■the pass/fail results of the test
■the round-trip delay time for suc cessful tests
■the error code on tests that failed .
Action/
Object Qualifier Qualifier Description Permissions1
1You can place additional restrictions on the c ommand by selecting the object “ ip-address” on the Restricted
Object List:
Typ e change permissions
loginid
(an administered login such as inads), and press Enter.
Set the Additional Restrictions field to y in the Administration Commands section of the form.
Go to the second or third page of the form.
Enter ip-address in the list of Restricted Objec ts and press Enter.
Defaults
Feature
Interactions
ping ip-address
node-name
board
packet-
length
repeat
The IP address of the device to
ping in the following format:
www.xxx.yyy.zzz
Administered node name (use
display node-names)
The location of the C-LAN circuit
pack (UUCSS)
Range: 64-1,500 bytes
1-100
Examples:
ping ip-address 192.68.3.26
ping ip-address 192.68.3.26
board 1C05
ping ip address 168.24.3.66
packet-length 1500
init
inads
craft
customer
packet
length =
64 bytes