DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-188release pms-link
2
release pms-link
This command deactivate s MOs that are associated with a p roperty
management system link. These links provid e asynchronous data co nnections
from switches to peripherals; they are composed of a:
■Far end data module
■Simulated data channel on a NETCON board
■Manager that initiates and maintains the li nk
■Controller/protocol that services the link
Feature Interactions
Specific comp onent maintenance perfor med on a link sometimes conflic ts with
link maintenance, itself (busied out objects create l ink setup failure). Frequent
link re-setup attempts may delay fa ulty component recovery. For best results,
technicians should use b usyout to disable attemp ted link re-setup.
Output
The following example shows the output from the release pms-link command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release
pms-link init
inads
craft
none see below
Port This field is left blank.
Maintenance Name PMS-LIN K
Alt. Name Not applicab le.
release pms-link
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PMS-LINK PASS
Command Successfully Completed