Lucent Technologies 555-233-119 Processor circuit pack replacement

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-1148TRANS-ID (Translation-ID)
3
Processor circuit pack replacement
When replacing a proc essor circuit pac k, follow the procedures in Table 3-505:
■Standard Reliability:
— Be gin the procedure with
Step #3 .
■High and Critical Reliab ility:
— Follow the p rocedure through once . Work on the standby side first,
then on the active side.
NOTE:
Translations loaded from a duplicated system flash card into a simplex
system, even where one of the translation IDs on the flash card
corresponds to the ID on the p rocessor, results in translation ID mismatc h.
Table 3-505. Processor circuit pack replacement procedure
√Step Description Command Procedure
1. Supress alarms change
system-parameters
maintenance
Change the Alarm
Origination to OSS
Numbers field to neither
(Screen 3-5).
Press Enter to effect the
changes.
2. Busyout the standby
PPN busyout standby-spe
3. Remove the old
processor circuit pac k Unlatch the old processor circuit pac k and slide it out of
its slot (no power-down
required).
4. Replace the
processor Slide the replacement processor circuit pack in the
slot and latch securely.
5. System detects ID
mismatch The system detects the translation ID mismatch,
displays the warning me ssage,
and generates a MAJOR alarm
(TRANS-ID).
6. Release standby PPN release standby-spe Releases the standby PPN.
Continued on next page